Stuart
Senior Member
Posts: 169
|
Post by Stuart on Mar 7, 2005 19:58:31 GMT -4
Does onyone know for sure if any machine shops in the Maritimes have a machine to measure cams with?. I bought 3 Ford roller cams on ebay, they were listed as a stock HO cam, a B303 and a Crane cam with a .540" lift.
As far as I can tell with my digital calipers I got two stock HO cams and no B303 as they both come out to .444" valve lift once the math is done. The Crane cam is a 228/228 duration and .346" lobe lift piece - I called Crane today and confirmed this info.
|
|