|
Post by mojojoeyjojo on Sept 8, 2005 10:44:23 GMT -4
Can you direct me to what specifications a roll bar must meet in order to pass tech? As per : "Roll bar- Mandatory on all convertibles from 11.50 to 13.49." taken from the piczo site. Tubing diameter, mounting, (inspection or certification required?); any info welcomed.
Thanks, ~ Chris
|
|
|
Post by sam on Sept 8, 2005 13:13:45 GMT -4
Chris, go to Maritime dragracing.com they have a very detailed tech section there and Don is the person who takes care of the tech questions. They have pics and detailed illustrations, and Don will answer any other questions that you might have. You could also purchase a copy of the IHRA rule book which explains everything, I left my copy at the track or I would of answered your questions myself.
Sam Greenfield Dragway Tech Dept.
|
|
|
Post by mojojoeyjojo on Sept 8, 2005 13:27:09 GMT -4
Thanks Sam
|
|