|
|
Post by kawie1975 on May 16, 2011 18:09:17 GMT -4
Hello, Does anyone have a recommendation for the best aluminum cyl heads for a SBC. I am currently using a set of the factory "camel hump" heads off a 327. Has anyone tried the "Patriot style" heads listed on Ebay?
thanks
|
|
|
|
Post by sam on May 16, 2011 21:20:30 GMT -4
Boils down to how much you would like to spend, in the end what really counts is what will the head flow, and in my experience I have found that advertized numbers are usually missleading. Have seen a few flowed and in my opinion Air Flow Research (AFR) is the ones that are closest to advertized numbers and will do what the say they will do.
Sam.
|
|
|
|
Post by Bad Influence on May 19, 2011 21:01:11 GMT -4
I built a 383 last summer for a customer and bolted on a set of the patriot heads. I did some research, and they are a decent piece for the money. They appear really similar to the Edelbrock E street which is also a good head for the3 cash. I agree with Sam if you want all out power AFR is the way to go
|
|
